Download the software you need

Click on the Software you want to download on the left and follow the instructions to download it.
Click the "Buy Now" button if you want to unlock the DEMO version. DEMO and licensed versions are identical.
Read the DEMO limitation for each software and inquire for a temporary serial number if needed.
Release Notes are available through the "News" page.
If you have any question, read the Knowledge Base and then contact us through our Support Desk.
Show Legacy versions >>>

Download MovieRecorder

  • MovieRecorderMovieRecorder 3.0.1
    17 July 2014
    single
  • MovieRecorderMovieRecorder 2.5.19
    30 April 2014
    single Dual Quad Octo

Download User Manual - Check Release Notes…

Installation instructions
Once downloaded, unzip the file, and drag and drop the Folder "MovieRecorder" in your Applications Folder. Make sure also to download and install the drivers for your AJA, Blackmagic-Design or Deltacast card. !!! AJA Drivers 10.5.2 / Decklink Drivers 9.9.3 or later are required !!!

DEMO Limitations
In DEMO mode, MovieRecorder 3 will burn a blue frame in the recorded file every 10 seconds.
In DEMO mode, MovieRecorder 2 will quit after 10 minutes.

How to unlock the DEMO version ?
Purchase a license through one of our resellers or the Softron online store, then just activate your serial number in the License window or plug your dongle in the computer.

How many Licenses? How many channels ?
MovieRecorder 3 supports multiple inputs in one application, there is thus only one version for single or multiple inputs. With MovieRecorder 2, you need to download the appropriate version for the number of channels that you want to record. But for the 2 applications you will need to purchase one license per channel.

Upgrade/Update instructions
MovieRecorder 3 is a paid upgrade. If you own a license from a previous version of MovieRecorder, you must purchase one upgrade per channel. Note that the "old" HASP dongles (with the red light) are not supported anymore with MovieRecorder 3. Just download the latest version and replace your previsous version. You do not need to deactivate and reactivate your serial number when updating your Softron software. Read the following article to know when to deactivate.

<<< Back to current versions

Legacy versions of MovieRecorder

  • MovieRecorderMovieRecorder 1.2.3
    18 November 2011
    Single Dual

  • Download one of the following applications to control MovieRecorder 1 & 2 remotely

    • MovieRecorder ControlMovieRecorder Control 2.3.4
      03 May 2013
    • MovieRecorder RemoteMovieRecorder Remote (iPhone)
      27 January 2011
    • MovieRecorder Remote HDMovieRecorder Remote HD (iPad)
      27 January 2011

    Drivers for the OLD dongles
    If you own an "old" dongle (the ones with the red light on and without the Softron logo on), you will need to install the drivers of the dongle for it to work. If you have the metalic dongles, you will NOT need to install any drivers.

  • HASP Dongle DriversHASP Dongle Drivers (For OLD dongles)
Show Legacy versions >>>

Download Multicam Logger

  • Multicam LoggerMulticam Logger 1.1.13
    25 March 2014

Check Release Notes…


Installation instructions
Once downloaded, unzip the file, and drag and drop the file "Multicam Logger" in your Applications Folder. You do not need to deactivate and reactivate your application when updating your software.

DEMO Limitations
In DEMO mode, Multicam Logger will allow you to add 10 change of angles and send them to your editing station.

How to unlock the DEMO version ?
Purchase a license through one of our resellers or the Softron online store, then just activate your serial number in the License window or plug your dongle in the computer.
<<< Back to current versions

Legacy versions of OnTheAir Logger

  • OnTheAir LoggerOnTheAir Logger 2.1b11
    12 February 2010
    Single


  • Drivers for the OLD dongles
    If you own an "old" dongle (the ones with the red light on and without the Softron logo on), you will need to install the drivers of the dongle for it to work. If you have the metalic dongles, you will NOT need to install any drivers.

  • HASP Dongle DriversHASP Dongle Drivers (For OLD dongles)

Download OnTheAir CG

  • OnTheAir CGOnTheAir CG 1.15
    2 July 2014

Download User Manual - Check Release Notes…


Installation instructions
Once downloaded, unzip the file, and drag and drop the Folder "OnTheAir CG" in your Applications Folder. OnTheAir CG comes bundled with sample projects and graphics that will run fine only if the folder is in the "Applications" folder.

DEMO Limitations
In DEMO mode OnTheAir CG overlays a Softron logo on the video output.

How to unlock the DEMO version ?
Purchase a license through one of our resellers or the Softron online store, then download the drivers for the dongle and plug your dongle in the computer.

Upgrade/Update instructions
Just download the latest version and replace your previsous version.

Other Software
You will need OnTheAir CG Controller if you intend to control OnTheAir CG from OnTheAir Video and/or generate RSS tickers. RSS support is not compatible with Mac OS 10.8 Mountain Lion or later.
  • OnTheAir CG ControllerOnTheAir CG Controller 2.8.8
    25 June 2014
  • HASP Dongle DriversHASP Dongle Drivers

Download OnTheAir Live

OnTheAir Live is a free application and can be installed on any number of workstations. But you will need one running OnTheAir Node to use OnTheAir Live.
  • OnTheAir LiveOnTheAir Live 1.2.13
    25 June 2014

Download User Manual - Check Release Notes…

Installation instructions
Once downloaded, unzip the file, and drag and drop the File "OnTheAir Live" in your Applications Folder.

Download the iPad application
The iPad application works together with OnTheAir Live. It can take control of OnTheAir Node, and modify the playlists sent, it can not however build playlists.
  • OnTheAir Node RemoteOnTheAir Node Remote
    2 February 2011

Other applications
You will need at least one running and configured OnTheAir Node to use OnTheAir Live. OnTheAir Node is a paid application (one license per output channel). OnTheAir Tools is a free application that will analyse as-run-logs (the scheduling feature is only for OnTheAir Studio and OnTheAir Video)
  • OnTheAir NodeOnTheAir Node
    Playout server required
  • OnTheAir ToolsOnTheAir Tools 1.23
    25 April 2014
Show Legacy Versions >>>

Download OnTheAir Manager

  • OnTheAir ManagerOnTheAir Manager 1.2.27
    18 February 2014

Download User Manual - Check Release Notes…


Installation instructions
Once downloaded, unzip the file, and double-click on the "OnTheAir Manager Installer.pkg" file to start the installer.

DEMO Limitations
OnTheAir Manager can not send schedules to OnTheAir Node but you can build schedules. (Send us an email to ask for a temporary serial number to test it)

How to unlock the DEMO version ?
Purchase a license through one of our resellers or the Softron online store, then just activate your serial number in the License window or plug your dongle in the computer.

Upgrade/Update instructions
Just download the latest version and replace your previsous version. You do not need to deactivate and reactivate your serial number when updating your Softron software. Read the following article to know when to deactivate.

Other applications
You will need at least one running and configured OnTheAir Node on your network to OnTheAir Manager. OnTheAir Node is a paid application (one license per output channel). OnTheAir Tools is a free application that will analyse as-run-logs (the scheduling feature is only for OnTheAir Studio and OnTheAir Video)
  • OnTheAir NodeOnTheAir Node
    Playout server required
  • OnTheAir ToolsOnTheAir Tools 1.23
    25 April 2014
<<< Back to current versions

Legacy versions of OnTheAir Manager

  • OnTheAir ManagerOnTheAir Manager 1.2.9
    Single
  • OnTheAir ManagerOnTheAir Manager 1.2.11
    Single
Show Legacy Versions >>>

Download OnTheAir Node

  • OnTheAir NodeOnTheAir Node 3.1.12
    18 July 2014

Download User Manual - Check Release Notes…

OnTheAir Node 3 is a paid upgrade. If you own a version 1.x license, you can purchase an upgrade here.
Installation instructions
Once downloaded, unzip the file, and double-click on the installer to start the installation. Make sure also to download and install the drivers for your AJA, Blackmagic-Design or Deltacast card. !!! AJA Drivers 10.5.2 / Decklink Drivers 9.9.3 or later are required !!!

DEMO Limitations
OnTheAir Node plays a blue a DEMO frame every 10 seconds on the output, and only lists 100 media files per Media folder. All options are enabled in DEMO mode, make sure to purchase the option you need.

How to unlock the DEMO version ?
Purchase a license through one of our resellers or the Softron online store, then just activate your serial number in the License window or plug your dongle in the computer.

Upgrade/Update instructions
Just download the latest version and replace your previsous version. You do not need to deactivate and reactivate your serial number when updating your Softron software. Read the following article to know when to deactivate.

This software uses code of FFmpeg, licensed under the LGPLv2.1 and its source can be downloaded here.

!! Download a client application to control OnTheAir Node
  • OnTheAir LiveOnTheAir Live (Free)
    For Live productions
  • OnTheAir ManagerOnTheAir Manager
    Schedule 24/7 playout
<<< Back to current versions

Legacy versions of OnTheAir Node

  • OnTheAir NodeOnTheAir Node 1.2.37
    18 June 2014
  • OnTheAir NodeOnTheAir Node 1.2.30
    7 June 2013
Show Legacy Versions >>>

Download OnTheAir Studio

  • OnTheAir StudioOnTheAir Studio 3.1
    16 August 2013

Check Release Notes…


Installation instructions
Once downloaded, unzip the file, and drag and drop the File "OnTheAir Studio" in your Applications Folder.

DEMO Limitations
In DEMO mode OnTheAir Studio will quit after 10 minutes..

How to unlock the DEMO version ?
Purchase a license through one of our resellers or the Softron online store, then just activate your serial number in the License window or plug your dongle in the computer. If you are using an "old" dongle (the ones with a red light), you will need to download the drivers for the HASP dongle here.

Upgrade/Update instructions
Just download the latest version and replace your previsous version. You do not need to deactivate and reactivate your serial number when updating your Softron software. Read the following article to know when to deactivate.

Other Tools
OnTheAir Tools is a free application that will help you build schedules for OnTheAir Studio and anylyse the as-run-logs that it creates to know when and how many times tracks have been played
  • OnTheAir ToolsOnTheAir Tools 1.23
    25 April 2014
<<< Back to current versions

Legacy versions of OnTheAirStudio

  • OnTheAir StudioOnTheAir Studio 1.2b31
    7 February 2011
  • OnTheAir StudioOnTheAir Studio 2.0b8
    9 August 2011
Show Legacy Versions >>>

Download OnTheAir Video

  • OnTheAir Video 3OnTheAir Video 3.1.12
    17 July 2014
    Single Dual Quad

  • OnTheAir Video 3 is a paid upgrade. If you own a version 2.x license, you can purchase an upgrade here.

Download User Manual - Check Release Notes…

Installation instructions
Download the SINGLE version if you just need to play on one output, the DUAL version to be able to play 2 streams on one Mac, or the QUAD version for 3 to 4 streams. Once downloaded, unzip the file, and drag and drop the File "OnTheAir Video" in your Applications Folder. Make sure also to download and install the drivers for your AJA, Blackmagic-Design or Deltacast card. !!! AJA Drivers 10.5.2 / Decklink Drivers 9.9.3 or later are required !!!

DEMO Limitations
In DEMO mode OnTheAir Video 3 outputs a blue DEMO frame at some intervals. All options are enabled in DEMO mode, make sure to purchase the option you need.

How to unlock the DEMO version ?
Purchase a license through one of our resellers or the Softron online store, then just activate your serial number in the License window or plug your dongle in the computer. If you are using an "old" dongle (the ones with a red light), you will need to download the drivers for the HASP dongle here.

Upgrade/Update instructions
Just download the latest version and replace your previsous version. You do not need to deactivate and reactivate your serial number when updating your Softron software. Read the following article to know when to deactivate.

This software uses code of FFmpeg, licensed under the LGPLv2.1 and its source can be downloaded here.
  • OnTheAir ToolsOnTheAir Tools 1.23
    25 April 2014
<<< Back to current versions

Legacy versions of OnTheAir Video

  • OnTheAir VideoOnTheAir Video 2.5.24
    12 June 2013
    Single Dual Quad
  • OnTheAir VideoOnTheAir Video 2.4.44
    5 June 2012
    Single Dual Quad
  • OnTheAir VideoOnTheAir Video 2.2
    22 Oct 2006
    Single


  • Drivers for the OLD dongles
    If you own an "old" dongle (the ones with the red light on and without the Softron logo on), you will need to install the drivers of the dongle for it to work. If you have the metalic dongles, you will NOT need to install any drivers.

  • HASP Dongle DriversHASP Dongle Drivers (For OLD dongles)
Show Legacy Versions >>>

Download OnTheAir Video Express

  • OnTheAir Video ExpressOnTheAir Video Express 3.1.12
    17 July 2014
    Single Dual Quad

  • OnTheAir Video Express 3 is a paid upgrade. If you own a version 1.x license, you can purchase an upgrade here.

Download User Manual - Check Release Notes…

Installation instructions
Download the SINGLE version if you just need to play on one output, the DUAL version to be able to play 2 streams on one Mac, or the QUAD version for 3 to 4 streams. Once downloaded, unzip the file, and drag and drop the File "OnTheAir Video Express" in your Applications Folder. Make sure also to download and install the drivers for your AJA, Blackmagic-Design or Deltacast card. !!! AJA Drivers 10.5.2 / Decklink Drivers 9.9.3 or later are required !!!

DEMO Limitations
In DEMO mode OnTheAir Video Express 3 outputs a blue DEMO frame at some intervals.

How to unlock the DEMO version ?
Purchase a license through one of our resellers or the Softron online store, then just activate your serial number in the License window or plug your dongle in the computer. If you are using an "old" dongle (the ones with a red light), you will need to download the drivers for the HASP dongle here.

Upgrade/Update instructions
Just download the latest version and replace your previsous version. You do not need to deactivate and reactivate your serial number when updating your Softron software. Read the following article to know when to deactivate.

This software uses code of FFmpeg, licensed under the LGPLv2.1 and its source can be downloaded here.
<<< Back to current versions

Legacy versions of OnTheAir Video Express

  • OnTheAir Video ExpressOnTheAir Video Express 1.2.16
    30 October 2013
    Single

------

Download EASController

  • EASControllerEASController 1.0b3
    16 August 2011
Installation instructions
Once downloaded, unzip the file, and drag and drop the File "EASController" in your Applications Folder

DEMO Limitations
In DEMO mode, EASController will quit after 10 minutes.

How to unlock the DEMO version ?
Purchase a license through one of our resellers or the Softron online store, then just activate your serial number in the License window or plug your dongle in the computer.

Upgrade/Update instructions
Just download the latest version and replace your previsous version. You do not need to deactivate and reactivate your serial number when updating your Softron software. Read the following article to know when to deactivate.

Other Software
EASController only works with OnTheAir Node and OnTheAir CG. You should download these applications too if you need to test it.

Download GPICommander

  • GPICommanderGPICommander 1.2.4
    13 December 2013

Download User Manual - Check Release Notes…


Installation instructions
Once downloaded, unzip the file, and drag and drop the File "GPICommander" in your Applications Folder.

DEMO Limitations
The software is free, but you will need a GPICommander box to be able to use it.

Upgrade/Update instructions
Just download the latest version and replace your previsous version.

Download OnTheAir Switch

  • OnTheAir SwitchOnTheAir Switch 2.1b1
    30 May 2013

Download User Manual - Check Release Notes…


Installation instructions
Once downloaded, unzip the file, and drag and drop the Folder "OnTheAir Switch" in your Applications Folder. Make sure that the video router you intend to control is supported (read the Tech Specs page). Send us an email if it is not supported.

DEMO Limitations
In DEMO mode OnTheAir Switch will quit after 10 minutes.

How to unlock the DEMO version ?
Purchase a license through one of our resellers or the Softron online store, then just activate your serial number in the License window or plug your dongle in the computer. If you are using an "old" dongle (the ones with a red light), you will need to download the drivers for the HASP dongle here.

Upgrade/Update instructions
Just download the latest version and replace your previsous version. You do not need to deactivate and reactivate your serial number when updating your Softron software. Read the following article to know when to deactivate.
Looking for a Legacy Application?
Over the years, Softron Media Services has developed multiple applications.
Some have now been discontinued, but they are still supported.